How to clean power tools
WD-40 specialist degreaser can be used to clean power tools such as chain saws, drills, jigsaws, etc. Always follow the instruction manual when disassembling and cleaning tools to avoid any damage or accidents.
Things you will need
WD-40 Specialist® Fast Acting Degreaser
Heavy gloves and eye protection
Towels and cleaning rags
Steel wool and a toothbrush
Bucket of hot water
Vinegar
Specialist tool cleaner
Step 1
Take protection
Before you start to clean power tools, make sure you are wearing protective clothing. Heavy duty gloves are essential to protect your hands from the tools’ sharp edges. Be sure to wear eye protection too.
Step 2
Take apart and clean well
Take apart the tools and clean each part with WD-40 fast acting specialist degreaser. Scrub with steel wool and a toothbrush to remove all the dirt and grime. Repeat the process as necessary. Next, submerge any metal parts that are not connected to wires in vinegar and leave to soak for 5 minutes.
Step 3
Repeat cleaning process as needed
Remove the metal parts from the vinegar, rinse with water and dry with paper towels. If needed, remove any remaining grease and rust, by using a commercial tool cleaner. Follow the guidelines for useage on the packaging.
After cleaning, make sure that there is no moisture left anywhere. Finally, use a dry toothbrush to clean all the toggles and switches.
Step 4
Put back together
After everything is degreased, cleaned and thoroughly dried, put everything back together. Before plugging anything into a socket, make sure there are not any cuts in the wire that might have absorbed water.
Preventive Maintenance
WD-40 also has other specialist cleaners. Whether you are trying to clean garden tools, a car engine, floor tiles, motorbikes or bicycles, the range of WD-40 lubricants can help.
Related Tutorials
July 1, 2021
April 22, 2021
September 16, 2021
Contact Us
© 2025 WD-40 Company.
All Rights Reserved