Metal garden gates are one of the best choices you can make for your garden and your home. These gates offer durability, quality, style and resilience and can also add charm and character to your home. Whilst they may cost a little more than wooden ones, taking care of your metal garden gates properly will help to ensure that they last for many years to come.
If you have no idea how to take care of your metal garden gates, here is a simple guide to help you out.
Step 1 – Wash the Gate using Soapy Water
The first step in taking care of your metal garden gates, is to give them a good clean! Take a bucket and put some mild detergent in it and add some warm water. Mix it using your hands until you can see plenty of suds forming in the water. Use a sponge to apply the soapy water on to the gate and then, with a scrubbing brush, give your metal garden gate a good scrub. This will make it easier to get rid of bird dropping, grime and dirt gathered on the gate.
Step 2 – Rinse
Once you are done with washing the gates with soapy water, take a garden hose and rinse the gates thoroughly. Make sure there are no traces of soap left behind. Soapy residues can lead to discolouration of the gate. Once all the soapy water has been rinsed and the gates are clean, take a towel and dry both the metal garden gates. Allow them to be air dried by giving them as much time as they need.
Step 3 – Look out for Rust
When taking care of your metal garden gates, one of the biggest problems is rust. If your gates are not maintained properly, rust can easily develop. It is easier to remove rust when it is in its initial stages. Once it gets out of hand, you are at the risk of losing the gate altogether, over time.
Step 4 – Remove Rust
If you find any traces of rust on the metal garden gates, take a piece of sandpaper and rub it away. Make sure you work steadily and clear all the rusted parts of the gate. Be careful not to rub too hard or the paint of the gate will be damaged. Check both sides of the gate for rust and remove it thoroughly.
Step 5 – Wash and Rinse
Once you are done with removing rust from the gate, wash the gates again as mentioned in the first step. Follow the soapy water procedure with a rinse and dry the gates again using towels. Also allow the gates to air dry for at least 30 minutes.
Step 6 – Apply Primer
Applying Primer is an important step when taking care of your metal garden gates. Choose a primer that has rust inhibitors in it to keep the gate free from rust in the future. Open the gates wide and start spraying from to to bottom. For higher protection, apply two coats. Make sure the first coat is dry before you start applying the second one.
Step 7 – Lubricate the Gate Locks and Latches
This is one of the most important steps when taking care of metal garden gates, and it is important to choose the right lubricant for the job. WD-40 Multi Use Product works wonders when it comes to lubricating the gate’s locks and latches. It not only lubricates them, but also helps to keep them free from rust and functioning smoothly.
Step 8 – Paint
The final step of the process, when taking care of metal garden gates, is painting them. Once a year should be enough. Make sure you choose a paint that is suitable for the kind of metal garden gate you have. Painting the gate will provide it with a coat of protection against rust. You can apply two coats of paint if you feel one is not sufficient. Just make sure the first coat has dried well before you begin applying the second coat.
Metal garden gates not only look great but also offer maximum protection, durability and add elegance to your house. With the above steps, you can keep your metal garden gates in the perfect condition and can make them look as good as new in just a few simple steps!