A creaking door isn’t just a cliché from horror movies – they are very real and can be very irritating! The good news is that we can teach you what to put on creaky doors to stop the noise, without having to call a handyman.

The solution to your problem is as simple as removing the problematic door hinge and coating it with some lubricant.

Step 1: Remove the Hinge Pin Using a Nail Punch and Hammer

Place a nail at the bottom of the hinge and lightly tap the tip with your hammer. By doing this, you should have loosened the hinge pin enough to pull it out with your bare hands. If it doesn’t come out easily, you can even use the back end of your hammer to pull it out.

Step 2: Coating the Hinge Pin with Your Choice of Lubricant

When you are thinking about what to put on creaky doors, then a lubricant is essential.  It can help coat your creaky door’s hinge pin to ease its use in the pivoting process.  Plus, it will also prevent rusting which might have caused the problem in the first place.

With the help of WD-40 Multi Use Product Smart Straw, you can easily lubricate and protect your door hinges and hinge pins from rust and corrosion. All you have to do is spray the hinge liberally with WD-40 and clean off the excess with a microfibre cloth.

Step 3: Putting the Hinge Pin Back into the Hinge

Once the pin has been lubricated, you need to put it back into place. This can be done by wiggling it with your bare hand and then using your hammer-and-nail technique again. Now that the pin is back in place, you need to open and close your ‘once-creaky’ door a couple of times to make sure the problem is completely gone.

If, however, you find that the door is still squeaky, you can start over and make sure you’ve lubed the pin enough.

Step 4: Wipe Down Any of the Excess Oil

Oftentimes, you’ll find that the excess lubricant might cause some oily remains outside your door hinges.  Simply use rags to wipe off any excess oil.

You no longer have to be annoyed or frustrated whenever someone opens a door!